3D Modeling for Fire Fighting System
Accurate 3D Modelling for Coordinated Fire Fighting Systems
Detailed 3D modelling for fire fighting systems to improve coordination, identify clashes early, and support accurate installation and documentation.
-
Confirm the source data
We start from the latest approved datasheets, vendor drawings, specifications and project requirements, then confirm dimensions, connection sizes and materials.
-
Model and coordinate
We build each component, assemble it in position, and check orientation, clearances and access against surrounding equipment, piping and structure.
-
Drawings and final review
We produce dimensioned arrangement, assembly and fabrication drawings with bills of materials, then review model and drawings against the approved sources.
Electrical Modeling
We also model the electrical side of your fire fighting system, so control panels, releasing equipment and junction boxes are coordinated with the mechanical design. Branded products are modelled from the manufacturer's current datasheet.
-
01
Fire Extinguisher Panels
We model the panels that monitor and release automatic suppression systems, with cable entries, operating clearances and mounting locations.
-
02
Scame
We model SCAME industrial electrical products, such as enclosures, junction boxes, plugs and sockets, to the selected product datasheet.
-
03
Autopulse
We model Autopulse releasing control equipment, with its detection inputs, circuit connections and release interface to the suppression system.
-
04
Autocall
We model Autocall fire alarm panels, detectors and notification devices from the selected product range, with accessible panel locations.
-
05
Junction Box
We model junction boxes with terminals, cable glands and mounting, selected to suit the area classification and environment.
Mechanical Modeling
Besides the full 3D model, we also model each of these mechanical items individually, covering fire protection equipment, assemblies and piping, so you get one coordinated design from a single team.
-
01
Fire Fighting Deluge Skids
We model pre-assembled deluge skids on their steel base frame, with valves, piping, strainers and instruments, ready for fabrication.
-
02
Fire Fighting Equipment Design
We design and arrange fire fighting equipment and its mechanical components to protect buildings, process areas and industrial facilities.
-
03
Pipe Routing and Pipe Layout
We plan pipes, fittings, valves, supports and connections into a practical route, allowing for access, clearance and maintenance.
-
04
Fire Hose Cabinet
We model protective cabinets that store the hose, nozzle, landing valve and accessories, so they stay accessible in an emergency.
-
05
Fire Hose Reel
We place hose reels, a rotating drum of semi-rigid hose on a water supply, where trained users can reach early-stage fires safely.
-
06
SCBA (Self-Contained Breathing Apparatus)
We model breathing apparatus storage with cylinder, regulator, facepiece and harness, so firefighters can reach air supply in smoke.
-
07
EEBA (Emergency Escape Breathing Apparatus)
We place escape breathing devices for short, emergency escape from a hazardous atmosphere, not for extended firefighting.
-
08
Fire Extinguisher
We coordinate portable extinguisher types and mounting positions so each suits its fire class and stays visible and reachable.
-
09
Windsock
We position windsocks on poles where they stay visible, helping people choose the safer escape direction during a gas release.
-
10
Hydrants
We model hydrant outlets on the firewater network, with valves, connections and access zones for hose connection by firefighters.
-
11
Safety Signs
We coordinate hazard, mandatory, prohibition and exit signs, plus equipment location signs, for clear visibility and correct mounting.
Outstanding Customer Service And Quality
We identify the most effective fire engineering solutions to help you achieve safety and compliance goals
Contact Us